Four Loop Detector For Sale Vehicle Loop Detector for Sale New Products

Four Loop Detector For Sale

Four Loop Detector For Sale New Products, Four Loop Detector For Sale Installation On The Intersection, How Does An Inductive Loop Detector Work, Induction Loop Traffic Detector, Inductive Loop Traffic Detector Cost.

Four Loop Detector For Sale of panel indication and how to switch the above information.
The power LED is displayed on the front panel: the LED above the red power supply indicates "PD1, PD2"
The CH, CH2, CH3, and CH4 functions are to detect the LED: if the LED is continuously lit: it indicates that the vehicle is detecting.

If the LED on the display panel flashes slowly: it indicates that the current cycle is short-circuited or the number of distortions after the cycle is insufficient. If the LED on the display panel flashes quickly: it indicates that the current loop is open or looped and twisted too much. The SW1 displayed on the Four Loop Detector For Sale panel is corresponding to CH1 and CH2, and the SW2 displayed on the Four Loop Detector For Sale panel is corresponding to CH3 and CH4. The settings used for the Four Loop Detector For Sale our presence and pulse, The first thing we need to know is DIP NO. DIP MODE and function in three parts. When using SW1 DIP 6 to CH1, DIP MODE selects ON, the function is Pulse output, then DIP 1  to CH2, DIP MODE selects OFF, the corresponding function is Presence output, when you set Sw2, DIP NO. DIP 6 to CH3, DIP MODE selects ON, the corresponding function is Pulse output, then DIP 1 to CH4, DIP MODE selects OFF, the corresponding function is Presence output.

Regarding the sensitivity setting of the Four Loop Detector For Sale, the gear position of each factory design is different, and the setting is also different. The sensitivity of the ground sense is very important to the product of the four loop detector for sale. The higher the sensitivity of the product, the better the quality of the product and the better the sensitivity. The sense of land, the advantage is that the vehicle is installed in the entrance and exit, railings do not crash, the four loop detector for sale of the company produced by our company, the sensitivity setting standard is, first see the setting sensitivity button SW1 DIP7 DIP8 and sensitivity setting 4 items, use CH, DIP7 selection is set to ON, DIP8 selects the same setting as ON sensitivity is set to High. If DIP7 selection is set to ON, DIP8 selects the same setting as ON sensitivity is set to High. If DIP selection is set to ON, DIP8 selection is set to OFF and sensitivity is set to Medium-High. If DIP7 selection is set to OFF, DIP8 selection is set to ON, sensitivity is set to Medium-Low. If DIP7 selection is set to OFF, DIP8 selection is set to OFF, sensitivity setting For Low.