LED stud light with good quality

LED stud light 

LED stud light with good quality and good performance.  Road stud is a common means of traffic barriers used to guide people in the right direction to prevent speeding and traffic accidents. Mainly used in high ways, tunnels, railways. Manufactured from a high impact resistant polycarbonate resin, the inner-ribbed contour of the stud is shaped to dissipate tire impact, increase strength and reduce damage. The polycarbonate reflective lens is coated with a superior protective material that combines ceramic and polymeric elements, adding more resistance to abrasion and cracking. The result is a road stud that demonstrates high-impact strength and holds up longer on today’s heavily trafficked road network.  High-performance road stud light applies to the intersection. 

Good quality LED stud light with cast aluminum shell material. The cast aluminum road stud size was 100*108*20MM. Two kinds of a working model. The first one was always on. The second one was the flashing model.  The LED light source of the  LED stud light was Taiwan crystal lamp beads. The working voltage was 24VDC. And the most important was that NobTra LED stud light visible distance over 500Meters. The vehicle can see more clearly and it can avoid some traffic accidents. if the LED stub light with the red light. Then the vehicle can not go and the driver must wait at the intersection and wait for the pedestrians to come to cross the intersections. NobTra LED stud light can bring a safe life and build up a civilized and orderly society.  The waterproof of the LED stub light was IP68 and The lamp color was red, green, amber. The operating temperature of the LED stub light was -20 degrees to 50 degrees.  The load capacity of the LED stub light was 20T.  The power consumption of the good-performance stub light lower 2.5watt.  Per units with 3pcs LED and LED chips services life over 100,000 hours.  The LED stud light fixed method was stainless steel screw and nylon tube. The controller of the LED stub light was Microprocessor and the controller of the LED stub light material was ABS and with IP65 waterproof level. The power consumption of the LED stub light lowers 2watt also.  Except for the LED stub light. Our factory also exports the high flux traffic signal light, vehicle loop detector, and controller system.  Welcome to consult us if you are interested in our product.   

The Advantage of the LED stud light 
1.The round design has little resistance to impact which makes it robust.

2.Two reinforced veins are designed inside to strengthen compression resistance, electronics and optics are fitted inside which makes the unit waterproof.
3.According to the requirement the number of LEDs can be a single light, three lights on one side. 

4.Two screw holes are designed on both sides to be fitted steadily with screws in the road or round post.

5.Epoxy glue is filled in the shell. Easy, simple, and steady to install like a standard road stud with two screws.

6. Waterproof stub light used well for the intersection and junction.