Traffic Signal Loop Detector Installation Vehicle Loop Detector for Sale New Products

Traffic Signal Loop Detector Installation 

Traffic Signal Loop Detector Installation  For Sale, Traffic Signal Loop Detector Installation Price, Induction Loop Traffic Detector, Loop Detector Wiring Diagram, Loop Detector Price

Traffic Signal Loop Detector Installation LD-200 terminals produced by our company have a total of 11 numbers, each of which represents a different function. The following is a description of the function of each digital connection. (When using Traffic Signal Loop Detector Installation LD-200, first of all, you need to pay attention to the input power supply voltage and For the external power supply voltage, please refer to the chart below for details.
The terminal corresponding to each number, digital 1 wiring, power input is 230, digital 2 wiring, the same 230 power input, digital 3 wiring, connection CH1 ring induction coil contact, digital 4 wiring, same connection CH1 ring induction Coil contact, digital 5 wiring, connection CH2 ring induction coil contact, digital 6 wiring, connection CH2 ring induction coil contact, digital 7 and 8 wiring are the same, CH1 relay no voltage contact output, Digital 9 wiring, grounding point, digital 10 and 11 wiring, CH2 relay no voltage contact output. The following is an introduction to the Traffic Signal Loop Detector Installation LD-200 panel, which mainly explains the panel indicators and switches.

POWER LED displayed on the front panel: If the red LED is displayed above. This indicates that the current Traffic Signal Loop Detector Installation indication detector power status is working. If the indicator is working properly, the indicator light will be on, indicating that the external power supply for operation and wiring is normal. If the panel indicator is off, the current power connection method is incorrect or there is no external power input.
If the CH1 LED is displayed on the dual-channel sense panel: the green LED indicator works correctly, indicating that the CH1 detects the loop and the fault. Next, CH2 LED: If the panel displays a green LED, it indicates the CH2 detection loop and fault status. SW1 in the two-way sense: CH1 LOOP This is the function adjustment switch.

Traffic Signal Loop Detector Installation LD-200 of the ground has an adjustable loop coil for intelligent detection.
In the installation and use of Traffic Signal Loop Detector Installation of the ground, it is best to remember to set the CH1 and CH2 to be intelligent detection mode. The CH1 and CH2 functions are mainly to avoid Traffic Signal Loop Detector Installation function of the different models of the vehicle chassis. At the same time, it is better to identify the vehicle and the vehicle passing smoothly. If the CH1 and CH2 are not adjusted to become the intelligent detection mode during installation, Traffic Signal Loop Detector Installation feeling is likely to cause the detector to fail, and there is no way to work correctly, especially in the area where the installation sense is often In the case of trailers and large trucks entering and exiting.