Single Vehicle Loop Detector For Sale Vehicle Loop Detector for Sale New Products

Single Vehicle Loop Detector For Sale

Single Vehicle Loop Detector For Sale From China, Single Vehicle Loop Detector For Sale Applications, Vehicle Loop Detector Layout, Loop Detector Wiring Diagram, Traffic Signal Loop Detector Installation.

Single Vehicle Loop Detector For Sale LD-106  rotation range produced by our company: 20-2000uh. According to the needs of customers, the voltage can be selected: 12-24VDC or 85-240VAC. Single Vehicle Loop Detector For Sale LD-106 relay output is divided into two types: online relay/fault relay. Geo-sensing work temperature: -40 ° C - + 70 ° C. Single Vehicle Loop Detector For Sale LD-106 frequency can be set with 4 switches, 20-80KHz. Ground response time: turn on 10-90MS, turn off 10-90NS. If you need to reset, you can reset it through the button on the front of the chassis. Humidity requirements for the normal working environment: up to 95% relative humidity without consideration. Product sensitivity setting: There are 16 ways to choose from, the highest can be selected: 0.010% DL / L, the lowest can choose: 2.56% DL / L. Ring wire for installation: 2 core shielded cable is required for installation over 10 meters, and the distance between the control box and the loop cannot exceed 30 meters.

The installation requirements and installation details of Single Vehicle Loop Detector For Sale LD-106 must be checked before installation. The waterproof level of the control outer box used for the installation Single Vehicle Loop Detector For Sale LD-106 must be checked. Because this product is generally installed outdoors, the installation control outer box requires the waterproof level to be IP65; Installation should be as close as possible to the sensing circuit, the installation distance is too far, it will affect the normal use of the product; Single Vehicle Loop Detector For Sale LD-106 should be installed away from the strong magnetic field, the information of the strong magnetic field will interfere with Single Vehicle Loop Detector For Sale LD-106; the installation of Single Vehicle Loop Detector For Sale LD-106 needs to avoid the loop There is a high-voltage line running near the detector; Single Vehicle Loop Detector For Sale LD-106 cannot be installed on the vibrating object, because there is no way for the vibrating object to make Single Vehicle Loop Detector For Sale LD-106 work normally. When the control outer box is installed within 10 meters of the loop, the outer box can be controlled by ordinary wires. To the loop. A 2-core shielded cable is required for more than 10 meters. The distance between the outer box and the loop must not exceed 30 meters. When installing, keep the product plug and socket in the vertical direction. Can not swing left and right, the result of the left and right swinging and pulling out of the ground is that it will damage the bottom of Single Vehicle Loop Detector For Sale LD-106 and the stitches。