Parking lot of traffic lights And Loop Detector Use Of Sale

Parking lot of traffic lights

Parking lot traffic lights, also called 100mm red-green traffic light, play a crucial role in enhancing safety and reducing collisions for drivers. When the red light is on, vehicles are instructed to wait, and when the green light is displayed, they can proceed, particularly improving traffic flow on one-way streets.

Key Features:

• Energy Savings: Up to 90% reduction in power consumption compared to incandescent lights.
• Enhanced Reliability and Safety:
  • Improved visibility throughout the product's lifespan.
  • Reduced need for emergency lamp replacements.
  • Design minimizes sun phantom effects.
• Easy Installation: Can be easily installed into existing signal enclosures.

Product Specifications of 100mm traffic light:

• Shape: 100mm (4”)
• Cover: Cobweb cover
• LEDs: High brightness LEDs with integrated optics
• Sealing: Moisture and dust-tight seal
• Total Harmonic Distortion: <20% (with PFC)
• Operating Temperature Range: -20℃ to 60℃ (optional)
• Viewing Angle: Average ≥30°, Downward ≥30°
• Operating Voltage Range: 220V
• Insulation Resistance: ≥2M
• Lifespan: 100,000 hours
• Housing Material: PC (PMMA)

Our 100mm parking lot mini traffic lights  are designed to reduce overall operating and maintenance costs while ensuring long-term reliability and traffic safety. If you have any questions or need further information, please feel free to contact us.

Color	size(mm)	Model Number	Profile	Voltage	LEDs	Typical Wattage at 25℃	Luminance (cd/㎡)	Typical Dominant Wavelength (nm)
red	100	JD100R-1	Round	12-24V	45	<3	>4000	625
Green	100	JD100G-1	Round	12-24V	45	<3	>4000	500

100mm red-green traffic light size:

Installation Guide for Parking lot of traffic lights

Installation of the Shield:

1. Confirm Direction: Ensure you have confirmed the correct installation direction for the traffic signal light.
2. Fix the Shield: Attach the aluminum shield to the traffic signal panel using four M4*6 standard nails.

Hole Position:

1. Drill Holes: Drill three holes with a diameter of 15 millimeters, following the provided installation diagram.
2. Height Placement: The traffic core should be fixed to the pole at a height of 2.5 meters from the ground to the lowest end of the pole.
3. Positioning: Ensure the front of the traffic light faces the middle of the vehicle lanes. Note that the direction can be adjusted by modifying the pole.

Installation Steps:

1. Insert and Secure: Insert the tip into the two holes and secure it with a club gasket.
2. Cable Insertion: Insert the cable through the designated pathway.
3. Fix Brackets: Attach the two traffic brackets to the M10 screws and secure them by screwing down the nuts.

Signal Direction Adjustment:

1. Release and Adjust: Loosen the connecting nail between the screws and the traffic light.
2. Adjust Direction: Adjust the traffic signal light to the desired direction.
3. Secure: Tighten the screws and verify the correct alignment of the traffic light.

Additional Features:

• Integration with Parking Systems: The 100mm red-green traffic light can be integrated with vehicle loop detectors to enhance the parking system's efficiency.

This guide should assist in the proper and effective installation of Parking lot of traffic lights, ensuring safety and functionality. For detailed information on each step, you can consult professional resources or reach out to installation experts​