Price of Loop Detector Vehicle Loop Detector for Sale New Products

Price Of Loop Detector

Price of Loop Detector From China, the Price of Loop Detector installs a lot of parking Traffic Loop Installation Cost, Vehicle Loop Detector Price. Install a loop detector system from the NOBLE LD-105 underground at the entrance or exit of your truck scale to easily detect vehicle motion. The vehicle ring detector is used to detect the presence of the vehicle, the vehicle is opened by a level, or as a safety device to prevent the lift bar from closing the vehicle on its road. Inductor rings can be used for direct burial or cutting. Typically, loop detectors can be easily installed under asphalt, concrete or asphalt, placing a directly mated coil loop under the surface before applying asphalt or concrete, and installing the cut coil ring in a saw-in mounting slot. The size of the coil ring is installed according to the local driving vehicle. We need to make the right coil ourselves. We recommend two styles of coils.

A vehicle loop detector is used to detect the presence of the vehicle to open the barrier. Typically, an inductive loop detector system consists of three components: a detector, a loop, and a loop extension cable. In general, the loop is connected to the loop detector. Noble LD-105 Loop Detector adheres to all necessary industry-defined standards and has core expertise in parking management, traffic management systems, and more in the public and private sectors.

Noble LD-105 Price Of Loop Detector of Operation Panel and Switches:                                           

1.POWER: There are two indicators on the top, red LED indicator. If the display is completely lit, the power supply is normal.
2.LOOP / FAULT: Amber LED indicator. If it is fully lit, the vehicle is detected. If the amber LED is blinking,
Explain that the loop is wrong.
3. SW1 (sensitivity): Noble LD-105 sensitivity selection. Mainly used to select sensitivity, choose from
0 to 9, A~F, 0 indicates the lowest sensitivity, and F indicates the highest sensitivity.

Noble LD-105 When applying many loops in the vicinity, it may be necessary to change the frequency to avoid interference. RESET button: Pressing the RESET button will reset the detector. The reset is usually used after any DIP changes and installations.

 Noble LD-105 Price of Loop Detector product testing method:

Product testing speed test method: test at room temperature, test tools: motor, multimeter, oscilloscope, etc.
Use the same sensible coil (any sensible quantity within the standard) to connect to the original and developed products, placed under the motor rotor blade, Price Of Loop Detector test at the same distance and in the same environment, adjust the motor speed to the maximum, startup, turn off the motor when the motor rotates Slowly reduce the speed from high speed. When the motor drops to a certain speed, the sensing detector starts to detect and send a signal, and the A and B relay work. The A and B relay input 220VAC zero line to control the light on and off. Display. Note: The MCU may malfunction when the motor is turned to low speed, that is, the rotating blade only enters once, and there may be two switching problems. The test confirms normal.