Single Photon Detector With Supplier Vehicle Loop Detector

Single Photon Detector

Single Photon Detector was our hot sale item. We are a comprehensive enterprise specializing in R&D, development, production, and sales of intelligent parking lot management systems. Based on a deep understanding of electronics, intelligence, and information. We help our clients enhance their security and security. Tailor-made a set of advanced and reliable products for customers. Comprehensive application solutions and comprehensive service system. The noble main product is parking lot equipment, vehicle loop detector, video camera detection, And most people choose the loop detector and install them in an intersection. 

For example. 1 set Master controller with 4pcs Slave Controller, 8set 200mm red green amber traffic light and 4pcs traffic light detector and 8pcs 200mm pedestrian traffic light. You must be curious as to why there is no countdown in the whole system. Because Our countdown is learning mode. and our loop detector will influent working of the controller. If we connect the countdown timer. It can not normal working. Thus our whole system without a countdown timer.  By our user manual and you can know our detector installation. Noble inductive loop detector with various items for your choice. 

Buried of the vehicle detector need to know that: The standard 3m wide road is buried. The size of the ground coil is 2m long and 80-100cm wide. The angle is 45° and 20cm long. The distance between the coil and the side of the road is about 30-50 cm, and the coil is vertically stacked around 4-6 turns. The total length is 30-40m. The cutting parameters of the buried trough are: 3-5mm in width and 40-50mm in depth. The depth and width should be uniform. Try to avoid the situation of flickering and sag. The coil should be in the same equilibrium position as the gate or controller. Special care is required to keep the tank clean and free of water or other liquids. The coil must be straightened when winding the coil, but not too tight and close to the bottom of the groove. After the coil is wound, the double-twisted output lead is led out through the lead-out slot. In the winding process of the wire slot, the actual inductance value of the inductor should be tested using an inductor. After the coil is buried, a nylon thread can be wound around the coil for enhanced protection. Finally, seal the groove with asphalt and soft resin. When routing the coils, be sure to clean the pebbles in the trunking to prevent the vehicle from being pressed back and forth and causing the coil to break or break the skin.  we export vehicle loop detector wire also. 

1.Noble gate loop detector with Strong production line, professional development team, professional technical workers, genuine guarantee. After-sales timely and two-year warranty for our single photon detector.
2.Strength witnesses, massive warehouse stocking, providing faster delivery arrangements for customers in need.
3. We have many cooperation shipping companies. Thus we will offer the best price for you.