300MM High Power Solar Warning Light

    Solar Warning traffic light series widely using in manufacturing facilities, for pedestrian safety, stop and yield signs, vehicle directions, emergency instructions, parking safety, school zone safety and important intersection for warning. Next, Let me give you some introduction of 300mm high power solar warning light.

Brief introduction of 300MM High Power Solar Warning Light

1. Cover of our solar flash warning light can be cobweb or clear lens.

2.Solar warning light has wider viewing angle.

3. Flashing times in a minute can be optional.

4.Utilizes constant current source to maintain consistent light output.

5. Engineered for superior thermal management.

6. LED solar traffic warning light is environmentally friendly & energy saving.

7. Meets and/or exceeds CE&ROHS standards.

8. Maintains 70% of the initial luminance intensity after 100,000 hours of operation.

9. Excellent moisture and dust resistance.

10. The shape of our Solar traffic warning light can be full ball ,or arrow etc.

11. All our solar flash warning light have 2 years warranty

Features of 300MM High Flux Solar Warning Light

• Modern and popular design
• High efficiency, high brightness, wide view angle
• 90% energy saving than traditional light
• Long life span: ≥100,000 hours
• Multi-ply sealed water resistant
• Light intensity automatically adjustable
• Exclusive optical lens, good color and enhanced uniformity
• Up to national standard GB-14887-2003

Installation:

1. Mount the yellow flashing lamp on the support rod with two M10*50 screws, and then tighten with the M10 nut and washer;
2. Install the solar panel on the solar panel fixing bracket with four M4*30, and then tighten and fix it with M4 nut and gasket;
3. Fix the yellow flashing light on the light pole with the hoop, adjust the direction of the light, determine the position, and then tighten with M12*120 nut and washer;
4. Install the solar panel on the support rod, fix it with M8*80 screw nut and gasket, adjust the angle of the solar panel through the shaft screw, and tighten it with nut washer; 300mm high power solar warning light.
5. Connect the solar panel power cord through the wiring diagram, connect the bottom interface of the yellow flashing light with the aviation waterproof joint, open the button, and the yellow flashing light can work;
6. Attachment: If the yellow flashing light needs to be installed on the vertical light pole, it can be matched with the mounting hole spacing of the C-shaped bracket, and the screw hole of the drill collar 12 is installed at the top of the light pole;